{"product_id":"vortex-alembic-create-copper-dome-kit","title":"Vortex Alembic + Create Copper Dome Kit","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Still Spirits Vortex Alembic Kit with the Create+ Copper Dome provides the ultimate water-free, top-half distillation setup. It pairs a traditional copper dome lid with a modern, air-cooled condenser column. You must attach this entire assembly onto your own compatible 25-litre boiler or Grainfather base.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eComponent Descriptions\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e• Create+ Copper Dome: A heavy copper cap that sits right on top of your own heating tank. This pure metal strips out stinky sulphur compounds during the boil, making your finished liquor taste much cleaner and smoother.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e• Vortex Air Condenser: A tall cooling pipe with metal fins and three electric fans. It uses room air to turn hot vapor back into liquid without any water.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e• Modular Fittings: A full set of 2-inch steel bends, rubber seals, and strong metal clamps. These parts lock the dome and pipe together, so nothing leaks out.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e• Digital Thermometer: A small screen with a metal wire that slips into the top bend. It monitors the exact heat of your rising steam.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e• Fan Speed Controller: A small dial that speeds up or slows down the fans. It lets you change how fast your spirit cools and drips.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eWhat You Need:\u003c\/b\u003e\u003cbr\u003e• Wall Power: A standard electrical outlet to plug in and run the cooling fans.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eHow it Works:\u003c\/b\u003e\u003cbr\u003eAlcohol vapor rises into the heavy copper dome, where the metal removes stinky sulphur compounds. The clean vapor then flows down through two internal pipes lined with metal fins. These fins soak up the heat, and three built-in fans blow it away into the room to liquefy your spirit\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003e\u003cb\u003eInstructions: \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003ePlace the heavy copper lid onto your separate heating base. Clamp it down tightly using your standard clips or seals to stop leaks. Fasten the two-inch metal adapter straight onto the top opening of the dome. Link the ninety-degree steel pipe to the adapter with a rubber seal and a metal clamp. Slide the digital thermometer wire into the built-in sensor hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAttach the heavy fan-cooling tower to the top steel bend. Make sure the column tilts downward so the liquid drains easily. Push the silicone hose onto the bottom spout. Put the open end of the hose right into a clean glass jar.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003ePlug the Vortex cord into the wall. Turn the dial to start the cooling fans before you turn on your heat source. Heat your liquid until it boils. Twist the fan dial up for more cooling power or down slightly to change how fast your spirit drips out.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eCare and Cleaning Guide: \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eWash the copper cap with warm water after each run. Scrub dark spots with citric acid to keep the metal active. Soak the steel bends, clamps, and rubber seals in warm soapy water, rinse them, and let them air dry. Never drop the electric fan unit into water. Use a damp cloth to wipe down the outer frame and the metal fins.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003ePour clean, warm water through the inside pipes to clear leftover alcohol film. Vacuum the fan grills and fins regularly to remove dust. To clean the steam path, run a boil with half white vinegar and half water. The fin edges are very sharp. Always hold the unit by its main frame when building, washing, or storing it to protect your fingers.\u003c\/p\u003e","brand":"Still Spirits","offers":[{"title":"Default Title","offer_id":54344156152102,"sku":"241026032322","price":934.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/7067\/6774\/files\/Vortex_alembic_kit_copper_dome.png?v=1794010590","url":"https:\/\/thebrewshed.com.au\/products\/vortex-alembic-create-copper-dome-kit","provider":"The Brew Shed Team","version":"1.0","type":"link"}